USER MANUAL :
DOCUMENT NAME
Onboard 24V 30mA power generator. The
of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need
for a secondary power supply. This option will also function under battery operation.
Large onboard non-volatile memory
dependent).
Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and
transmitted at programmable intervals.
Remote programming of all setup parameters via GPRS link or SMS.
Ideal for leak detection, alarming to prevent
Onboard Bluetooth can stream diagnostic information about signal strength,
Touch sensitive button and LED's for manual wakeup to server and diagnostic purposes etc.
1.3
Specifications
GPRS/EDGE/ LTE/4G Modem Technology
LTE-FDD B1/B3/B5/B7/B8/B20/B28
LTE-TDD B38/B40/B41
GSM 850MHz/900MHz/1800MHz/1900MHz
Bluetooth interface
Powered by battery or external 12V supply
Option of external power with battery failover and sleep
All management software supplied free
Standard Alkaline Batteries - 3 x D cells (5+ years)
RS485 Modbus Port (2-wire)
Isolated 4-20mA Input port
24V 30mA Generated Power Output
Up to 20000 record datalog memory (application dependent)
Full SMS driven command set
Logging intervals 1 minute to 1 month
Rugged housing with seal eye
Touch sensitive button and LED Diagnostics
Configuration and diagnostics through Bluetooth interface
Fully configurable remotely
Stream data in real-time when powered by external supply
Size 185mm x 130mm x 55mm (including cable gland
Housing Protection Class : IP68 - Max 1.2m, 30 days
Environment : -20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems
Uses a Micro SIM card
MANUAL : CDS551 CIRRUS MODBUS LOGGER
NAME
CLASSIFICATION
DATE
PAGE
Onboard 24V 30mA power generator. The Cirrus Modbus logger can generate a stable 24V output at a maximum
of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need
pply. This option will also function under battery operation.
volatile memory - This logger can record in excess of 20000 datalog records
Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and
transmitted at programmable intervals.
Remote programming of all setup parameters via GPRS link or SMS.
Ideal for leak detection, alarming to prevent water loss.
Onboard Bluetooth can stream diagnostic information about signal strength, network status etc.
and LED's for manual wakeup to server and diagnostic purposes etc.
GPRS/EDGE/ LTE/4G Modem Technology
FDD B1/B3/B5/B7/B8/B20/B28
GSM 850MHz/900MHz/1800MHz/1900MHz
Powered by battery or external 12V supply
Option of external power with battery failover and sleep
All management software supplied free
3 x D cells (5+ years)
24V 30mA Generated Power Output
Up to 20000 record datalog memory (application dependent)
Logging intervals 1 minute to 1 month
Touch sensitive button and LED Diagnostics
Configuration and diagnostics through Bluetooth interface
time when powered by external supply
Size 185mm x 130mm x 55mm (including cable glands)
Max 1.2m, 30 days
20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems
PAGE
ogger can generate a stable 24V output at a maximum
of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need
records (application
Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and
etwork status etc.
and LED's for manual wakeup to server and diagnostic purposes etc.
20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems
