- 33 -
User’s Guide
Pan/Tilt Network Camera
(Section 10) Alarm I/O
1.
Sensor installed to Alarm IN 1 is on and LED is turned on.
2.
LED light indication of Alarm IN works only when surveillance setting of "Sensor" is put on
[Enable]
3.
Click Alarm Out, then On/Off device can be controlled
4.
Alarm Out can control regardless of surveillance setting of "Sensor".
(Section 11-1) Position
1.
It is an absolute position window.
2.
Horizontal axis: it is left to right pan axis in range of 0°~320°
3.
Vertical axis: it is up and down tilt axis in range of 0°~105°
4.
Position Point: It is the position of camera at the time.
5.
Position control: move the position of camera using left click of mouse.
6.
Click the right mouse button and drag so that you can move the absolute
position window.
Position Point
All the button of Function part is in Toggle method. (On/Off)
Sensor installed to Alarm IN 1 is on and Alarm Sound is generated by PC speaker
Click icon to cancel.
(Absolute Position Window)
