- 40 -
User’s Guide
Pan/Tilt Network Camera
3.
File Size is determined by video quality and check the speed of network upload referring
to this.
It is set in High by manufacturer.
iii.
Brightness: It controls the brightness of image. . (Default: 5)
iv.
Contrast: it controls definition of image. (Default: 2)
2.
Audio
A.
Enable/Disable
i.
Set up in (Enable) when using Audio function. (Default)
B.
MIC.
i.
Select
1.
Internal: Use built-in microphone of camera
2.
External: It can be used when external microphone is installed to Audio-In of camera.
ii.
Volume
1.
Volume of microphone can be adjusted in 4 steps
2.
Higher the level, louder the sound becomes, and noise increases at the same time. So
choose adequately.
C.
Speaker
i.
Setting: It is recommended to Set up in [ON] after speaker is installed to Audio Out of
camera.
ii.
Volume
1.
Volume of speaker can be adjusted in 4 steps
2.
Higher the level, louder the sound becomes.
Bit stream Size/Sec
File Size/Frame
