- 52 -
User’s Guide
Pan/Tilt Network Camera
10.
What do I do if Active X Control is not set as shown on the below diagram??
Occasionally, Active X Control is not set up as
intended depending on the system. in this case, a new
version of Active X Control cannot be set up.
Therefore
Active X Control that is previously
installed abnormally should be deleted and re-
installed. To delete, for Windows 2000 or XP,
you need to delete [
SPNetViewer.SPNV] in the
folder of
C:\winnt\Downloaded program Files
and for Win98, C:\windows\Downloaded
program Files. You need to re-connect and set up Active X Control again. If security warning
window pops up during set-up, click [(Yes)]. Also in case of high security of Internet Explorer
Active X Control is often not set up. So, check whether the level of security is set as normal in
[tool]
Æ
[Internet option]
Æ
[security] or not and in the future, Active X Control will be able to
set manually
11.
IP Address is changed often because dynamic IP of xDSL or Cable Modem is used. What do
I do then?
You can receive and check Dynamic IP by E-mail and the more convenient way is to check by
using Service (DDNS).
12. Can I use several network cameras with computer simultaneously when only one public IP
address is used and the rest is a network composed of private IP using IP Router?
You can use port-forwarding which is one of the advanced functions of IP Router. For detailed
method of use, refer text page21-22, Camera setting and port-forwarding method in private
network using IP Router
13. Is it connectable from outside when a firewall has been set up in the network of camera?
When a firewall has been set up, normally the general data communication is open to use
through port 80. Therefore you should set Web Server Port and Video Server Port of camera up
with other ports and request to open the set-up ports to network administrator.
14.
How far can the network camera be located outdoors?
The set-up distance of UTP Cable is usually 100m, but set-up in 200m distance is also possible
without a bridge.
15.
Can the network camera be set up outdoors?
Pan/Tilt Network Camera is designed for indoor use and to setup in outdoors a specially
designed waterproof case must be purchased approved by manufacturers. 6 different camera
housing items including indoor cases are available.
