- 3 -
User’s Guide
Pan/Tilt Network Camera
z
Do not disassemble or remodel
if any problem occurs while using the product, contact the agent for repair. Do not attempt to
repair it by yourself.
z
Use the appointed power supply only
Incorrect power supply can damage the product. Use an adaptor provided by manufacturer
and, exchanges it at a local agent if damaged.
z
Where to install;
-
It is designed to be used only indoors where the room temperature is between 5C and 40C
-
Avoid places high in moisture
-
Avoid places with intense lighting
-
Avoid direct sunlight.
-
Avoid any exposure to gas or oil.
-
Avoid dusty areas.
-
Avoid places with strong electro-magnetic force
z
Do not put the camera faced towards sunlight or electric light
It can cause critical damage to CCD device.
z
Do not touch or wipe lens
Make sure you do not leave fingerprints on lens.
z
Handle with care when carrying or installing the product
Strong shock or vibration can damage the product.
z
In case of using outdoors, it is necessary that the product is kept in a waterproof and
insulated case to keep moisture-free and room temperature.
This product is designed for indoor use so it must be put in the special case provided.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAUTION
To prevent any damage or accident due to mishandling the points mentioned above
regarding to safety must be followed. Make sure to read them before installing the
product. Clover Electronics Co Ltd is not responsible for any damage or incident
occurred due to negligence of the safety points or caution
