- 57 -
User’s Guide
Pan/Tilt Network Camera
1.
Connect to [Admin Tools] of camera.
Factory default value of administrator’s
account is set up with User Name: admin,
Password: pass. Enter them and click [OK]
2.
[Click [Firmware Update] of [System] from
menu on the left side of [Admin Tools] page.
3.
Click [Start Update], and then firmware update window pops up as shown below. Click
[
찾아보기
] and attach downloaded file(*.cmp).
z
When updating Firmware web browser under the Internet Explorer 5.0 (SP2)
may not work normally. So it is recommended to use Internet Explorer 5.5 and
over.
z
Do not close window in the process of Firmware Update..
z
Do not disconnect network or turn off power in the process of Firmware Update
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[Ref 4] Firmware Update method
