CSV-7300 QUICK INSTALLATION GUIDE
Thank you for purchasing our CSV-7300 Product.
After unpacking the product, please make sure you have all the items provided and checked for any damages. In case of any
missing/damaged parts please inform your supplier immediately.
You should have :
• CSV-7300 MST Hub
• 1x USB Type A cable,
• Quick Install Guide
Please make sure your Host System has the latest drivers updates installed before installing the MST Hub
- Connect your preferred Display(s) to the designated connector(s) one by one and power on your Display unit(s)
- Connect the USB Type A connector to a Type A connector for powering the MST Hub
- connect the DP connector to the source.
In case you have any problems with obtaining the correct images on your displays,
Please press the RESET button, for min. 1 sec., at the bottom side of the CSV-7300.
Allow some time for the MST Hub to perform the reset for all three ports.
For any Questions please check our forum section on our
website www.club-3d.com
Reset Button
USB Type A power cable Connection
