BODY AND TRIM
Front Bumper
4
FRONT BUMPER
The underbody bracket (1) connects the front suspension to the front underbody
(Figure 4-2, Page 4-5)
. Each bracket
is secured in place by two taptite screws (2) tightened to 13 ft-lb (17.6 N·m).
The front bumper (3) is attached to the vehicle frame rails by nuts (5) and bolts (4). The nuts (5) need to go on top of the
bumper attaching brackets, always insert the bolts (4) through the bottom. The nuts are tightened to 13.3 ft-lb (18 N·m).
2
1
2
3
4
5
617
Figure 4-2
Bracket and Front Bumper
2009 Electric Precedent Maintenance and Service Manual
Page 4-5
