Cleaning the Vehicle
2003 Carryall Electric Vehicle Owner’s Manual
Page 31
PLUG AND RECEPTACLE
Carryall 1 and Carryall 2 Vehicles
The charger cord, plug, and receptacle are wear items and should be inspected daily. Visually inspect them
for cracks, loose connections, and frayed wiring; they must be replaced when worn or damaged. If charger
plug or receptacle show signs of corrosion or the plug is difficult to insert or remove, the receptacle contacts
and plug terminals should be cleaned with a good electrical contact cleaner or lightly sprayed with WD-40
®
brand spray lubricant. The plug should then be inserted and removed several times to ensure ease of inser-
tion, ease of removal, and good electrical contact.
See following NOTE.
NOTE:
If the warning tag has been damaged or removed from the DC cord, have it replaced immediately.
Receptacle Fuse Link
As an additional feature to protect the batteries and charging circuit from an overload, Carryall 1 and Carryall
2 electric vehicles are equipped with a receptacle fuse link
. If the charger does not turn on when
the vehicle is placed on charge, inspect the fuse link.
∆
WARNING
• If the receptacle fuse link is blown, determine the source of the electrical problem and correct
it before replacing the fuse.
CLEANING THE VEHICLE
Carryall vehicles are equipped with an ArmorFlex
®
front body and an all-aluminum rear body and cargo bed.
Use only commercially available automotive cleaners with a sponge or soft cloth for normal cleaning. A gar-
den hose at normal residential water pressure is adequate.
Figure 14 Sense Lead Fuse
48 VOLT FUSE LINK
SENSE LEAD FUSE