19
Attachment Interface
HYDRAULIC ATTACHMENT SYSTEM
WARNING
• Do not have hands in the area of the cylinders when extending or retracting the cylinders.
6.
Remove the two retaining rings (4 and 7) and pins (3 and 6) that secure the two cylinders (1 and 5) to the mount
(2)
2228
Figure 19-13
Align the Attachment Arm Holes
2232
Figure 19-14
Remove Retainer Pins from Both Cylinders
256
Figure 19-15
Joystick
2234
Figure 19-16
Raise Attachment Arm, Install Pin, and
Retainer Ring
7.
Swing the attachment interface cylinder down.
8.
Turn the key to the ON position but DO NOT start the engine.
9.
Move the joystick (1) forward to extend the attachment arm cylinder
10.
Move the joystick (1) to the right to extend the attachment interface cylinder.
11.
Turn the key to the OFF position.
Page 19-6
2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual
Summary of Contents for Carryall 1500 2016
