Attachments and Buckets
1.
Pull the attachment interface lever (1) fully to the left and into the unlocked position
(Figure 25)
.
2.
Enter the vehicle and fasten the seat belt.
3.
Start the engine and disengage the park brake.
4.
Press the joystick ON/OFF rocker switch (18) to ON
(Figure 13)
.
5.
Lower the attachment arm and tilt the attachment interface forward.
6.
Drive forward until the front edge of the attachment interface is completely under the top lip of the bucket (or
attachment)
(Figure 26)
.
7.
Tilt the attachment interface backward until the cutting edge of the bucket (or the attachment) is slightly off
the ground
(Figure 27)
.
8.
Stop the engine, put the Forward/Reverse Handle in NEUTRAL, engage the park brake, unfasten your seat
belt, and exit the vehicle.
240
Figure 27
Tilt Backward
241
Figure 28
Lock Attachment
WARNING
• Before you leave the operator’s seat:
– Put Forward/Reverse handle in NEUTRAL.
– Engage the park brake.
– Stop the engine.
– Turn the key switch to OFF.
9.
Move the attachment interface lever (1) fully to the right and into the locked position
(Figure 28)
.
NOTE:
If the lever does not engage in the locked position, see your dealer for maintenance.
10. If equipped, connect the hydraulic hoses from the attachment to the vehicle.
See Quick Couplers (If Equipped)
on page 24.
11. The attachment interface pins (1) (both sides) must extend through the holes in the mounting frame of the bucket
(or attachment), securely fastening the bucket or attachment to the attachment interface
(Figure 29)
.
IntelliTach All-Wheel Drive Diesel Vehicle Owner’s Manual
Page 37
Summary of Contents for Carryall 1500 IntelliTach
Page 2: ......
Page 83: ......
Page 84: ...Publication Part Number 103472517 Edition Code 0608G0613F 103472517...