Attachments and Buckets
Filling and Emptying the Bucket
3
4
1
2
1
2
3
4
249
Figure 36
Joystick Position – Filling Bucket
250
Figure 37
Joystick Position – Raise Arm and Tilt Bucket
Backward
1.
Lower the attachment arm all the way (1) and tilt the bucket forward (4)
(Figure 36)
until the cutting edge is on
the ground.
2.
Drive slowly forward to push the bucket slightly into the material.
3.
Raise the attachment arm (2) and tilt the bucket backward (3)
(Figure 37)
.
WARNING
• Load, unload and turn on flat level ground. Do not exceed attachment arm rated capacity. Failure to
obey warnings can cause the vehicle to tip or roll over and cause injury or death.
4.
Drive backward away from the material.
Using the Float Position
1
2
3
4
251
Figure 38
Joystick Position – Using Float
NOTE:
The primary function of the float position is for the mower, blade, or broom attachments. To level the ground
using float, the ground must contain loose debris.
IntelliTach All-Wheel Drive Diesel Vehicle Owner’s Manual
Page 41
Summary of Contents for Carryall 1500 IntelliTach
Page 2: ......
Page 83: ......
Page 84: ...Publication Part Number 103472517 Edition Code 0608G0613F 103472517...