Engine Oil
Page 34
2005 Carryall 272/ Carryall 472 Gasoline Vehicle Owner’s Manual
13. Tighten the oil filter by hand until tight. Do not use a band wrench or channel lock plier to tighten.
14. Lower the vehicle and remove the floor jack from under the rear of the vehicle.
15. Remove the dipstick and add engine oil into the dipstick port. Use a funnel or pour spout to direct the oil
into the dipstick port (Figure 25). With filter change, the engine requires 38 ounces (1.12 liters) of oil per
change. Refer to oil viscosity guidelines for selection of oil grade (Figure 26). Replace the dipstick.
16. Connect the battery cables, positive (+) cable first, and tighten terminals to 20 ft-lb (27.1 N·m). Coat ter-
minals with Battery Terminal Protector Spray (CCI P/N 1014305).
• Carryall 272:
16.1. Lower the cargo bed. See WARNING “For vehicles with cargo beds...” on page 10.
• Carryall 472:
16.2. Replace the rear bench seat.
Figure 22 Compress Snubber Downward
Figure 23 Remove Engine Oil Filter
Figure 24 Coat Rubber Seal
Figure 25 Add Engine Oil
Compress
down.
SNUBBER
SNUBBER
BRACKET
USED OIL FILTER
OIL DRIP GUARD
DRAIN PAN
