Vehicle Specifications
Page 40
2005 Carryall 272/ Carryall 472 Gasoline Vehicle Owner’s Manual
VEHICLE SPECIFICATIONS
SPECIFICATIONS
CARRYALL 272
CARRYALL 472
POWER SOURCE
Engine: 4-cycle OHV, 400 cc, 13 hp rated, single-cylinder, air-cooled, with pressure lubrica-
tion system
•
•
Fuel system: Side-draft carburetor with float bowl, fixed jets, fuel filters, and impulse fuel
pump
•
•
Governor: Automatic ground-speed sensing, internally-geared in unitized transaxle
•
•
Ignition: Transistor electronic ignition with electronic RPM limiter
•
•
Unitized transaxle, MC012C-AS00: Fully synchronized forward and reverse with neutral
(14.9:1 forward, 20.5:1 reverse) and differential lock feature
•
•
Electrical system: 12 volt, 500 cca at 0 °F (-17.8 °C), 650 at 32 °F (0 °C). 105-minute
reserve capacity and 35-amp charging capacity
•
•
Torque converter: Automatic, variable-speed, dry type
•
•
STEERING/SUSPENSION/BRAKES
Steering: Self-adjusting rack and pinion, Ackerman
•
•
Suspension:
Front: Independent A-arms with coil-over shocks
Rear: Semi-independent suspension with multi-leaf springs and dual hydraulic shocks
•
•
Brakes: Hydraulic brake system – self-adjusting drum brakes on each wheel with separate
hand-operated park brake
•
•
BODY/CHASSIS
Frame/Chassis: Twin I-Beam welded aluminum
•
•
Side and rear body: All aluminum with aluminum cargo bed
•
•
Front body: ABS/DR acrylic cap
•
•
Tires: 23 x 10.50 – 12 tubeless, 4-ply rated load range, front and rear
•
•
DIMENSIONS/WEIGHT
Overall length (box bed configuration)
120 in. (305 cm)
141 in. (317.8 cm)
Overall width
54 in. (137 cm)
Overall height (at steering wheel)
51 in. (130 cm)
Wheelbase
80 in. (203 cm)
101 in. (256 cm)
Ground clearance:
under differential
under foot platform
6.6 in. (17 cm)
11.4 in. (29 cm)
6.6 in. (17 cm)
11.4 in. (29 cm)
Front wheel tread
43 in. (109 cm)
Rear wheel tread
44.5 in. (111 cm)
Weight (dry):
with all-terrain tread
with turf tread
1106 lb. (501.7kg)
1066 lb. (477.2 kg)
1200 lb. (544.2 kg)
1160 lb. (526.0 kg)
Forward speed
17-19 mph (27-31 km/h)
Governed RPM: FE400 Engine
3850 (±30) RPM
Curb clearance circle (diameter)
24 ft. 1 in. (734 cm)
31 ft. 8 in. (965 cm)
Turning radius (per SAE J 695)
139.6 in. (355 cm)
15 ft. 6 in. (472.4 cm)
Intersecting aisle clearance
112.2 in. (285 cm)
120 in. (304 cm)
Floorboard height
17 in. (43 cm)
Specifications continued on next page...