ELECTRICAL COMPONENTS: DIESEL VEHICLES
Warning Lights
14
3.
Push the fusible link wire assembly into the harness and secure with new wire ties.
4.
Connect battery.
See Connecting the Battery – Gasoline/Diesel Vehicles, Section 1, Page 1-4.
WARNING LIGHTS
See General Warnings, Section 1, Page 1-2.
TESTING THE WARNING LIGHTS
See Test Procedure 23 – Coolant Temperature Warning Light Circuit on page 12-34. Also see Test Procedure
29 – Low Oil Warning Light Circuit on page 12-38.
WARNING LIGHT REMOVAL
1.
Disconnect battery.
See Disconnecting the Battery – Gasoline/Diesel Vehicles, Section 1, Page 1-3.
2.
Raise the hood.
3.
Disconnect the wires from the warning light (1)
.
4.
Press the retaining tabs and remove the warning light from the instrument panel.
WARNING LIGHT INSTALLATION
1.
Push a new warning light into the hole in the instrument panel until the plastic tabs are securely engaged
.
2.
Reconnect the wires from the wire harness to the warning light.
3.
Lower and secure the hood.
4.
Connect battery.
See Connecting the Battery – Gasoline/Diesel Vehicles, Section 1, Page 1-4.
2008-2012 All-Wheel Drive Maintenance and Service Manual
Page 14-5
Summary of Contents for Carryall 295 SE
