15
Air Intake System
GASOLINE ENGINE, MUFFLER, FUEL
SYSTEM, AND CLUTCHES
1.
Disconnect battery and spark plug wire(s).
See Disconnecting the Battery – Gasoline/Diesel Vehicles on
2.
Remove the hose from under the filter canister.
3.
Remove the hose from under the vehicle body on the frame.
4.
Slide the hose through the frame support bracket and remove the hose from the vehicle
2167
Figure 15-27
Air Intake Support Bracket
AIR FILTER INTAKE HOSE INSTALLATION
1.
Slide the air intake hose through the frame support bracket
.
2.
Secure the air intake hose to the air port under the vehicle body
.
3.
Secure the air intake hose under the filter canister (inlet) port
.
See following NOTE.
NOTE:
Ensure the hose is positioned against the port surfaces and the clamps are positioned between the port
bead and port surface.
4.
Connect battery and spark plug wire(s).
See Connecting the Battery – Gasoline/Diesel Vehicles, Section
Page 15-28
2008-2012 All-Wheel Drive Maintenance and Service Manual
Summary of Contents for Carryall 295 SE
