Gearcase Lubrication
Page 52
2007 Carryall 295 Intellitach and XRT 1550 Intellitach Diesel Vehicle Owner’s Manual
Transmission:
Clean and install the drain plug (2) before filling the transmission with new lubricant
. Tighten the
drain plug to 8 ft-lb (11 N·m). Remove the fill plug on the top of the transmission case and use a funnel when
filling with lubricant.
See Periodic Lubrication Schedule on page 45.
Apply Loctite 567 to the threads of the
fill plug and tighten to 21 ft-lb (28 N·m).
Check the level of lubricant at the level indicator plug (1). Apply Loctite 567 to the threads of the level indicator
plug and tighten to 21 ft-lb (28 N·m).
Rear differential:
Clean and install the drain plug (2) and washer before filling the rear differential with new lubricant
. Tighten the drain plug to 8 ft-lb (10.8 N·m). Use a funnel when filling the differential through the
lubricant level indicator hole (1).
See Periodic Lubrication Schedule on page 45.
Apply Loctite 567 to the
threads of the level indicator plug and tighten to 21 ft-lb (28 N·m).
Figure 56 Front Differential Lubrication Level
Figure 57 Transmission Lubrication Level
Figure 58 Rear Differential Lubrication Level
1
2
1
2
1
2
