Page 38
ONWARD 2-PASSENGER (ECH440) GASOLINE
Operators Manual
TPCC01BQ00EN019 (Edition B)
DAILY PRE-OPERATIONAL SAFETY CHECKLIST
INSPECTION
AREA
INSPECTION CRITERIA
General
• Make sure that all parts are correctly installed.
• Make sure that all nuts, bolts, and screws are tight.
• Replace missing, worn, or damaged items.
Decals
• Make sure all safety, regulatory, and marketing decals are correctly
installed.
• Clean the decals with a soft moist cloth.
• Replace missing, worn, or damaged decals.
Tires
• Examine for wear and damage.
• Replace worn or damaged tires.
• Make sure that the tire pressure is correct.
Battery
• Make sure that all battery hold-downs are tight.
• Make sure that the battery cables are correctly attached. Tighten as
necessary.
• Examine the battery posts for corrosion. If corrosion is found, remove the
corrosion.
Engine Oil
• Examine the oil level. Add oil as necessary.
Engine and
Muffler
• Make sure that the engine and exhaust system areas are free of debris.
Use a brush or compressed air to remove any debris.
Engine Fuel
• Examine the fuel system for leakage.
• Examine the fuel level. Add fuel as necessary.
• Replace missing, worn, or damaged items.
Engine Air Filter
• Examine the air filter. Replace if dirty or damaged.
Malfunction
Indicator Light
(MIL)
• When the key switch is set to ON, the MIL will turn on for 3 seconds. If the
MIL stays on, speak with your local dealer or distributor.
Vehicle
Performance
Inspection
• Do a vehicle performance inspection.
Summary of Contents for Onward HP 2-Passenger Electric
