ONWARD 2-PASSENGER (ECH440) GASOLINE
Operators Manual
TPCC01BQ00EN019 (Edition B)
Page 63
2.
Disconnect the spark plug wire (1).
3.
Use a spark plug socket to remove the spark plug.
SPARK PLUG INSTALLATION
1.
Apply a thin layer of high temperature antiseize lubricant to the spark plug threads.
2.
Use a spark plug socket to install and tighten the spark plug to 20 lb·ft (27 N·m).
3.
Connect the spark plug wire (1).
4.
Connect the battery.
TIRE PRESSURE MEASUREMENT
Before the tire pressure measurement:
• Disable the vehicle.
To measure the tire pressure:
1.
Remove the valve stem cap.
2.
Use a pressure gauge to measure the tire pressure.
3.
Adjust to meet the recommended tire pressure.
Note:
Go to the approved wheel and tire assemblies matrix on
for
information regarding tire type, inflation pressure, and lug nut torque.
Summary of Contents for Onward HP 2-Passenger Electric
