VILLAGER 2+2 LSV ELECTRIC
Operators Manual
TPCC01VS00EN017 (Edition A)
Page 31
POSITION
CONDITION
OFF
Normal position when the vehicle is not in use.
Electrical power from the batteries is not available to power the motor or
electrical systems.
Note:
Some electrical accessories operate independently of the key switch.
ON
Normal position when the vehicle is in use.
Electrical power from the batteries is available to power the motor and
electrical systems.
PARK BRAKE
WARNING
FAILURE TO ENGAGE THE PARK BRAKE CAN CAUSE PROPERTY
DAMAGE AND PERSONAL INJURY. AFTER THE VEHICLE STOPS,
ENGAGE THE PARK BRAKE UNTIL IT IS FULLY ENGAGED AND
PREVENTS THE VEHICLE FROM MOVING.
UNINTENDED VEHICLE OPERATION CAN CAUSE SERIOUS
PERSONAL INJURY OR DEATH. THE PARK BRAKE WILL RELEASE
AUTOMATICALLY WHEN THE ACCELERATOR OR BRAKE PEDAL IS
PUSHED. PREVENT ACCIDENTAL ACCELERATOR OR BRAKE PEDAL
ACTUATION.
The park brake is a variable position control that is used to make sure that a
vehicle does not move while parked.
Push the park brake firmly to engage the park brake.
To disengage the park brake, push the accelerator or brake pedal.
RUN/TOW SWITCH
WARNING
UNINTENDED VEHICLE MOVEMENT CAN CAUSE SERIOUS
PERSONAL INJURY OR DEATH. WHEN THE RUN/TOW SWITCH IS
IN THE TOW POSITION, ALL MOTOR BRAKING FUNCTIONS,
INCLUDING WALK-AWAY BRAKING, ARE DISABLED.
The Run/Tow switch is used during towing, maintenance, or extended storage. Set
the switch to RUN for normal operation. Set the switch to TOW for maintenance,
extended storage, or when towed.
Wait 10 seconds before vehicle operation when the switch is set from TOW to RUN.
Do not quickly operate the switch from RUN to TOW and back to RUN. Wait 10
seconds to set the switch to RUN.
