VILLAGER 2+2 LSV ELECTRIC
Operators Manual
TPCC01VS00EN017 (Edition A)
Page 51
• Understand the function of all vehicle controls, indicators, displays, and gauges.
• Make sure that all passengers are seated and use the hand holds or handrails. The operator
must have both hands on the steering wheel.
• Front wheels are turned in the direction of travel.
• No obstructions are in the vehicle’s path.
• Forward / Neutral / Reverse control (FNR) is set to N.
• The park brake is set.
• The accelerator pedal is not pushed.
• The vehicle is at a full stop.
To start the motor:
1.
Put the key into the key switch.
2.
Turn the key to ON. Push the accelerator pedal to start the motor.
TURN OFF MOTOR
1.
Release the accelerator pedal.
2.
Stop the vehicle.
3.
Push and hold the brake pedal.
4.
Set the Forward / Neutral / Reverse control (FNR) to N.
5.
Turn the key to OFF.
6.
Engage the park brake to lock the wheels.
7.
Remove the key. Keep the key in a safe area.
FORWARD MOVEMENT
WARNING
FAILURE TO DECREASE THE VEHICLE SPEED IN BAD DRIVING
CONDITIONS CAN CAUSE PROPERTY DAMAGE, PERSONAL
INJURY, OR DEATH. DECREASE THE VEHICLE SPEED WHEN IN
BAD DRIVING CONDITIONS SUCH AS WET GRASS OR ROUGH
TERRAIN.
Before forward movement:
• Read and obey all safety decals and information located on the vehicle.
• Understand how to operate the vehicle correctly and safely.
• Understand the function of all vehicle controls, indicators, displays, and gauges.
• Make sure that all passengers are seated and use the hand holds or handrails. The operator
must have both hands on the steering wheel.
• Make sure that the front wheels are turned in the direction of travel.
• Make sure that there are no obstructions are in the vehicles path.
• The key switch is set to ON.
