VinciLab User’s Guide
| 13
For the directions of x, y and z axes of
the accelerometer see the image.
Holding the VinciLab in the shown
position should give the following
values of the component accelerations:
x-component ≈ 0 m/s
2
y-component ≈ 0 m/s
2
z-component ≈ -9.81 m/s
2
.
6. Signal generator
Via the 3.5 mm Audio Out port VinciLab outputs DC and AC voltage signals between -5V
and 5V. This functionality is present only on VinciLabs sold starting from February 2019
(the Audio Out port of these models has a blue connector). There are two channels
available
3
.
7. Using VinciLab with computers and tablets
VinciLab can be used with computers:
1.
As a lab interface to collect data, the Coach 7 or Coach 7 Lite program running on a
MAC or Windows computer controls the data collection via USB or Wi-Fi.
2.
To transfer files between the ‘My Files’ folder on VinciLab and the computer (only via
USB).
3.
To display the VinciLab’s screen in a VNC Viewer Program (using VNC protocol via
Wi-Fi or USB).
VinciLab can be used with tablets:
1.
As a lab interface to collect data, the Coach 7 or Coach 7 Lite app running on an iPad
(only via Wi-Fi), an Android Tablet (via USB and Wi-Fi) and a Chromebook (only via
Wi-Fi) controls the data collection.
2.
To display the VinciLab’s screen in a VNC Viewer Program (using VNC protocol via
Wi-Fi).
For more detailed description see ‘
V. Using VinciLab with a computer and a tablet’.
3
This functionality will be supported starting from March 2020
.
