24 |
VinciLab User’s Guide
available diagrams, etc.
- tap this icon to open the Tool menu with specific options.
In the bottom bar the following icons may be present:
Icon
Tap this icon to:
Start the measurement
Grey when no sensor(s) connected/selected
Interrupt the measurement at any time
Appears after the measurement is started
Take a manual measurement
Appears in the manual measurement mode
Stop manual measurement
Appears in the manual measurement mode
Open the Measurement Settings
Go to the Home Screen
Tap
to switch back to Coach
3. Typical measurement procedure in the Coach Application
5
•
Turn VinciLab on by pressing its power button. Wait until the Home Screen appears.
•
Ensure VinciLab has sufficient battery power or is connected to a power supply.
•
On the Home Screen tap
to open Coach.
•
Connect the desired sensor(s) to the sensor input(s) of VinciLab.
•
Open a new Coach Result:
-
Tap
or Tap
and select
New
. If you only want to work
with the internal sound sensor
select
New (Sound Only)
.
-
A new Result opens and displays
the
Activity
Screen.
1.
When a connected sensor is
detected and identified then
its name appears in the
Activity Screen and its live
readings are displayed on the Sensors Screen.
5
This procedure does not describe the Event-based type of measurement, use Tutorial ‘Event-based
measurement’ to learn how to perform this type of measurement.
