50 |
VinciLab User’s Guide
2. Working conditions and maintenance
For your safety and that of your equipment, follow these rules for handling, for cleaning
VinciLab, and for working more comfortably.
!
Your VinciLab is designed to be operated on a desk or hand-held.
!
Your VinciLab is not waterproof. Precautions must be taken to ensure that liquid
cannot enter the unit.
!
Do not expose VinciLab to extreme heat or cold sources and to direct sunlight for
extended periods of time.
!
Operating VinciLab outside the following ranges may affect performance:
o
Temperature: 5° to 40° C.
o
Relative humidity: 0% to 90% (noncondensing)
!
Never force a connector into a port. When connecting a sensor, make sure that the
sensor cable connector matches the port, and that you have positioned the
connector correctly.
!
When cleaning VinciLab, first turn it off and unplug the connected sensors and USB
cable. Then clean with a soft, lint-free cloth. Avoid getting moisture in any openings.
Do not spray liquid directly on VinciLab.
!
When replacing the battery, only use a VinciLab replacement battery pack supplied
by CMA.
!
When charging the battery always use the provided USB power adapter.
3. Factory reset
To perform a factory reset of VinciLab:
•
If VinciLab is on shut it down.
•
Press and hold the power button until the recovery process starts by showing the
message ‘
Preparing a factory data reset’
.
•
Follow the instructions displayed on VinciLab.
•
DO NOT
turn off the device during the recovery. The recovery process may take up
to 10 minutes.
4. Warranty
VinciLab is warranted to be free from defects in materials and workmanship for a period
of 24 months from the date of purchase provided that it has been used under normal
laboratory conditions. This warranty does not apply if VinciLab has been damaged by
accident or misuse.
The VinciLab battery is a consumable and is warranted to be free from defects in
materials and workmanship for a period of 12 months from the date of purchase.
The VinciLab screen is made of glass and could break if your device is dropped or if it
receives significant impact. Do not use VinciLab if its screen is broken or cracked as this
could cause injury too.
