14
Footprint Dashboard
Help Guide
Zone
(See page 22 for Adding a new Zone)
All zones that are created on the Dashboard will appear in this section. When selected all groups
and units in that zone are displayed under the relevant headings.
Group
(See page 22 for Adding a new Group)
All Groups under the selected Zone will appear in this section. When selected all units in that Group
are displayed under the relevant headings.
Unit
This section displays all the information regarding the units including:
Name
This is the friendly name of the unit
Total (W)
Total wattage used by the unit
Master (W)
Wattage being used by the master only.
Sockets
This displays the status of the auxiliary sockets.
Which will be
ON
,
OFF
, or
OFFLINE
. If Offline the dashboard is indicating that
the unit is not connected to the Gateway.
Override
This indicates that the units override controls are set to On or OFF. If set to
auto this means the unit will follow it’s set schedule or threshold.
Schedule
Indicates the schedule that is set for the unit. This may be an individual
schedule or parent schedule
Threshold
Indicates the THRESHOLD that is set for the unit. This may be an individual
schedule or parent schedule.
Overview
Administrator Level
Priority of Settings
Units
Unit can have their own individual
threshold and schedules applied.
If the status is ‘N/A’ then no settings
are applied and the unit will just
remain on or off.
If the unit is set to ‘Parent’ then they
will look towards the Group settings
for the information.
Group
If thresholds and schedules are in
place at this level then they will
distribute these settings to any unit
that are set to ‘Parent’
If no settings are found at this level
then unit set to parent will look
towards the Zone settings for the
information.
Zone
If thresholds and schedules are in
place at this level then they will
distribute these settings to any unit
that are set to ‘Parent’
For Zone settings to take affect then
no settings must be set at Group
level.
NOTE
: For any threshold or
schedule settings to take affect,
then the units override must be
set to AUTO.
Parents Settings
At this point the user has the ability to create parent settings (threshold or
schedule) for all the groups/units assigned to that specific Zone.
Override
The override buttons will allow all units to either be turned on, off, or set back
to auto.
Units On or Off
The total units that are
ON
or
OFF
are displayed.
Re-name Zone
The administrator can rename the Zone from this point.
Parents Settings
At this point the user has the ability to create parent settings (threshold or
schedule) for all the units assigned to that specific Group.
Override
The override buttons will allow all units to either be turned on, off, or set back
to auto.
Units On or Off
The total units that are
ON
or
OFF
are displayed.
Re-name Zone
The administrator can rename the Group from this point.
Zone
Group
Group
Unit
Unit
Unit
Unit
Unit
Unit
Unit
Unit
