EZBells
J
Carillon Operating Manual
14
Once all settings are correct, select the
Set Time
on the lower line of the display (it will be blinking
when selected), press
[ENTER]
. When
[ENTER]
is pressed, the real time clock will be updated to the
displayed settings. Pressing the
[CANCEL]
button will abort the Set Time menu without making
any changes to the actual time settings.
Note:
Be certain to properly set all of the time parameters, including: AM, PM, day and date.
Easter Sundays and Leap Year adjustments will only work properly if the Year is correctly set.
Use the
[
⊳
cursor]
and
[cursor
]
buttons to choose the
parameter to change. Since minor adjustments are more
frequently made, the minute digit is flashing on entry.
Use the
[cursor
]
button to increase settings, and
[cursor
]
button to decrease settings.
Move to “Set Time” with the
[
⊳
cursor]
or
[cursor
]
button.
Pressing the
[ENTER]
button will set the clock to the displayed
time.
[CANCEL]
will abort changes. In either case, the display
will return to the Setup menu.
Programming the Time Strike Parameters
Please read over this entire section prior to making any settings. Several decisions need to be made
at this time concerning the time of day you wish the clock to sound, how loud you want the clock
to sound, and what sound you want the clock to make!
Use the
[
⊳
cursor]
or
[cursor
]
button to select the Time
Strike setup menu. Press
[ENTER].
Use the
[
⊳
cursor]
and
[cursor
]
buttons to move around
the screen. Use the
[cursor
]
and
[cursor
]
buttons to
change times, days, volume level, and strike option. Changes may
be made to the item that is flashing.
Upon entering the Time Strike menu, the displayed time shall appear as the example shown above.
'12A to 12A' shows that all 15-minute intervals of the 24-hour day are selected. 'SUN .. SAT'
shows that all the days of the week are selected. Therefore, the initial display covers all periods in
the program schedule. This default setting will always appear when you enter this screen. This
does not mean that those are the current settings. The only way to check current settings is to go
into the “View” mode and check individual times. This is explained on page 20.
It is helpful to set the largest blocks of time first. Set the starting time field (to the left of ‘to’) to
the time that you want to start the time strike mode. From 12A you will use
[cursor
]
to select a
starting time. Next, press
[cursor
]
to get to the ending time field. From 12A you will use
[cursor
]
to select an ending time.
11:0
5
AM TUE 09-21
Year=01 Set Time
11:0
6
AM TUE 09-21
Year=01 Set Time
11:06 AM TUE 09-21
Year=01
Set Time
Time Strike
Set Time
Change Disc Function
12A
to 12A LEVEL:6
SUN .. SAT SET PROG