EZBells
J
Carillon Operating Manual
17
The program modifications available in the Time Strike menu are ongoing in nature. They will
continue on as scheduled until the program is changed. To make program changes to specific
times on the program schedule, refer to page 20, “Setting/Changing the Program Schedule”.
What you see is set in memory. Both the Time strike option and Level setting may be made over
the same time period. Select
SET PROGRAM
and press
[ENTER]
each time. Different time strike
types and level settings may be entered for different times and days.
After all settings are completed, press
[CANCEL]
twice to return to Standby mode.
Programming Loudness (Volume Level)
The loudness of your EZ Bells
J
carillon may be preset to specific levels for various times of the day.
This is accomplished by using the
Time Strike
menu. Eight preset levels are available,
Level:1
being the softest and
Level:8
the loudest.
Level:6
is pre-programmed at the factory to be the
normal play level. Select the desired level by using the
[cursor
]
and
[cursor
]
buttons to index
through the Time Strike types. The loudness levels follow the time strike types. Select
SET
PROG
, press
[ENTER]
then exit with
[CANCEL]
button, if finished.
Example display showing a reduction in level for the night hours.
Depending on the location of the installation, Time Strikes may
be played all night at reduced levels.
The attenuation for each level setting is:
8 +2 dB (maximum)
5
B
1 dB
2
B
6 dB
7 + 1 dB
4
B
3 dB
1
B
8 dB (minimum)
6 0 dB (nominal)
3
B
5 dB
Programming Function Buttons
You may select a swinging, pealing, tolling bell or play a Hymn by making your selection with the
function buttons, (
[1], [2], [3]
or
[4])
directly below the label on the screen. After making your
selection, the screen will prompt you to press
[ENTER]
to play or,
[CANCEL]
not to play.
This is displayed when the system is ready to play automatically.
Buttons
[1]
through
[4]
on the front panel become programmable function buttons when the
system is in standby mode. These four buttons are duplicated on the optional remote control unit.
The
FUNCTION
option in the setup menu allows you to reprogram the function buttons. These
come factory programmed for Swing, Peal, Toll and Hymn.
Each function button may be programmed to play up to four selections, or repeat a single selection
up to 199 times. In addition, the four letter label above the function button can be customized to
describe the function performed.
11P to 07A
Level:3
SUN .. SAT SET PROG
N 3:07 PM MON 07-25
Swng Peal Toll Hymn
