7
/
18
Network Dome/Vandal Camera Installation Manual
2
2
.
.
3
3
.
.
2
2
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
n
n
g
g
C
C
a
a
b
b
l
l
e
e
s
s
z
Power
Supplies Power to the Xnet product. Use 12V DC Adapter in the package
.
z
Analog Video Output
Use this output to monitor the analog video signal while installing.
(Select Video Out at menu screen to enable this output)
z
Audio Connection
MIC/Line Input (Mono)
Connects to auxiliary Audio Device or microphone.
Line Output (Mono)
Audio signal output to a Power Amplified device or Speaker. This can be used to listen to the audio
signal sent from a remote PC for Bi-directional Audio communication.
z
ALARM Input/Output
Connect to Alarm Input and Output
Sensor Input : Wires from various sensor type (IR, heat, and magnetic) can be connected.
Relay Output : Connect to an external Alarm device that operates by a relay such as Siren
Lamp or Alarm Light.
Please refer to
“2.3.3 Connecting to Alarm devices”
for Sensor and Relay connection.
- Alarm Output Common
- Alarm Output
- Alarm Sensor Input (-)
- Alarm Sensor Input (+)
- GND
- Line Output
- GND
- MIC/ Line Input
Alarm Terminal
Audio Connection Terminal
To 12VDC Power Adapter
Do not use this connector when powering up the product through LAN cable. (PoE) The product
is not covered under warranty when it is damaged by connecting both Ethernet power and 12V
DC power to this terminal.
