CNB IPM3063N Instruction Manual Download

Page: 32 / 82

• PWR UP ACTION :

This function enables to resume the last action executed before power down.

Most of actions such as Preset, Pattern, Swing and Group are available for this
function but Jog actions are not available to resume.

• AUTO FLIP :

In case that tilt angle arrives at the top of tilt orbit (90

), zoom module camera keep

moving to opposite tilt direction (190

) to keep tracing targets. As soon as zoom module

camera passes through the top of tilt direction(90

), images should be reversed

automatically and

appears in screen. If this function is set to OFF, tilt movement

range is -5 ~ 95

• PARKING ACTION :

This function enables to locate the camera to specific position automatically if
operator doesn’t operate the Viewer for a while. The Park Time can be
defined as an interval from 1 minute to 4 hours.

• ALARM I/O :

4 Alarm Inputs and 1 Alarm output are used. If an external sensor is activated, camera

can be set to move to corresponding preset position. It is noted that the latest alarm
input is effective if multiple sensors are activated.

• PRIVACY ZONE :

To protect privacy, Max. 4 Privacy Masks can be created on the arbitrary position

to hide objects such as windows, shops or private house. With Spherical
Coordinates system, powerful Privacy Zone Mask function is possible.

• CAM ADJUST :

WB(White Balance) and AE(Auto Exposure) can be set up independently for each

preset. There are 2 modes, "Global" mode & "Local" mode. The Global mode means
that WB or AE can be set up totally and simultaneously for all presets in "ZOOM
CAMERA SETUP" menu. The Local mode means that WB or AE can be set up
independently or separately for each preset in each preset setup menu. Each Local
WB/AE value should activate correspondingly when camera arrives at each preset

location. During jog operation, Global WB/AE value should be applied. All Local
WB/AE value do not change although Global WB/AE value changes.

• FOCUS MODE :

This mode exchanges focus mode automatically between Manual Focus mode and

Auto Focus mode by operation. Manual Focus mode activates in preset operation
and Auto Focus mode activates during jog operation. With Manual mode at presets,
Focus data is memorized in each preset in advance and camera calls focus data in
correspondence with presets as soon as camera arrives at a preset. It should
shorten time to get focuses Focus mode changes to Auto Focus mode automatically
when jog operation starts.

• P/T/Z Information :

Current Pan/Tilt angle in degree, zoom magnification and a compass

direction.

• Alarm Information :

This information shows current state of input and relay output.

If the input and output points are ON state it will show a number
corresponding to each point. When they are OFF state, ‘-‘ will be
displayed.

ex) Point 2 & 3 of inputs are 1 of output is ON, OSD will show as below

• Camera ID :

Current Camera ID(Address).

• Action Title :

Followings are possible Action Titles and their meaning.

• Preset Label :