Special operation
1.
Calibrate screen
2.
Navigation
Notice: navigation as an optional,if you buy a unit with out navigation,the
GPS in main manu is useless.
3.USB/SD
-6-
Tips:it must be calibrated if botton on screen in average sensitivity or
fingers not in touch with the valid touch botton.
Steps:the unit is play status under DVD/USB/SD mode, long press
button( about 3 seconds),come to calibration page,use something sharp
but soft material touch the cross in screen center, then touch the 4 corner
as the same.
Steps: If you choose navigation,once start the unit you can touch the
button
direct to navigation mode or press
SRC/POWER
button
on the panel. Press
Back/ Turn off
button to escape navigation mode
or press
RC/POWER
switch to other mode.(More details please read
navigation brochure)
GPS
Under USB/SD mode,users can choose music direct in list; If need touch
button,you should touch right corner to let it works.
NOTE:
The function will be upgraded
renewed continually,extra information
if any differences between practical operation and description in
manual,all depend on the practical operation of this model.Thanks!
REMOTE CONTROLLER
-7-
Title
Sub-T
ENTER
Setup
Angle
Slow
VOL+
SEL
VOL-
ZOOM
MODE
BND
P/N
AMS
RPT
ST
PROG
PBC
OSD
GOTO
Audio
SEEK-
SEEK+
LOC
RDM
9
(1)Power Switch.
Press this button to open the power supplier,
Press it again to close it
.
(2)MUTE button
Press this button to close the volume output.
(3)Title Button
When the machine is the DVD state, press
This button to get back the top menu.
(
4) Source (function change button)
Press this button to change the volume source
output.
(5)OSD (display prompt) Button
When the machine is playing state, press
this button to express the playing time, residual
time, or all disc time, and residual time.
(6)Seek+
Seek-
button
Press this button to search the item by handle.
Can also to choose the upwards item and next
item and fast-forwards/reverse.
(7)VOL+/VOL- (volume control button)
Press this button to adjust the volume loudly
or quiet.
(8)SEL (particularly setting up of Volume
warning) ,Press this button to choose
the mode of particularly setting up of
Volume warning.
(9)BAND(P/N) button,
When the machine is radio state,
press this button to choose the wave
band.When the machine is DVD, VCD
state, press this button to choose the
automatism, PAL or NTSC format.
(10)LOC/RDM (long-district, short range
Play/ random play) Button, When the
Machine is radio state, press this button
To change the long-district, short range
Play. When the machine is DVD, VCD,
CD state, press this button to get the
Random play.
(11)Stop Button
Press this button to stop playing.
(12)
Pause button,Press this button
To change the play or pause.
(13)ST/PROG (stereo and unilateral
Track change/ set the programmer
Play) Button,When the machine is
Phe radio state, press this button to
Change the stereo to unilateral track.
When the machine is play back,
Press this button to set the program
Mer to play with STCP.
(14)(0
10+) Numeral Button,
Decimal, for example 19 item, press
1 and 9 button;
Centesimal, for example 120 item:
press 1, 2 and 0 button.
(15)AMS/RPT (Scan automatically
memory/Repeat Playing Item) Button
When the machine is radio state, press
this button to scan and memory the
broadcasting station.When the
machine is playing back, press this
button to repeat playing.
CnBuyNet.com
Summary of Contents for CBNJBLJ7685
Page 1: ...C n B u y N e t c o m...
