Operating instruction
High-Z T-Series
Siemensstrasse 13-15
D-47608 Geldern Tel. +49 (0)2831/91021-20
Page 16
15.02.2014
2.4
Staff requirements
2.4.1
Qualification
The different Tasks contained in this instruction require different qualifications auf
persons that are intrusted with these tasks.
WARNING:
Risks caused by insufficient qualifications of persons!
Insufficient qualified persons cannot assess the extent to which they
represent a risk handling with the machine and therefor run the risk of
injuries or death for themselves and others.
Work on or in the unit must be done only by duly qualified staff and
in full compliance with the appropriate instructions and pertinent
regulations...
Keep insufficiently qualified persons away from the work area.
Only persons of whom it may be expected that they perform their work reliably are
permitted as personnel. Persons whose responsiveness is affected, e.g. by drugs, alcohol
or medicines are not authorized.
In this instruction all required qualifications, for the different people, with different tasks
are named:
Operator
The operator was instructed by the operating company in a briefing about the tasks
assigned to them and instructed about possible hazards because of improper conduct.
Tasks, die which are carried out beyond the normal operation, only are allowed to be
carried out by an operator if this is mentioned in this instruction and the operating
company has assigned the operator
expressly.
Electrician
An electrician whose technical training, skills and experience together with their
knowledge of pertinent regulations and documentation means that they are capable of
assessing the work to be carried out and detect and prevent any possible dangers.
An electrician is trained especially for its working environment, and knows the relevant
standards and regulations.
Qualified personnel
Qualified personnel based on their professional training, know-how and experience as
well as knowledge of the applicable standards and regulations is able to perform
assigned work activities and to detect and to avoid possible dangers on their own.
Manufacturer
Curtain maintenance work is only allowed to be carried out by authorized and skilled
personnel. Other personnel is not authorised to carry out these tasks. In order to carry out
this maintenance work, please call our customer service!
