Operating instruction
High-Z T-Series
Siemensstrasse 13-15
D-47608 Geldern Tel. +49 (0)2831/91021-20
Page 45
15.02.2014
6.2.2
Install worktop
The worktop (not included) may be as following, according to mounting maximum
dimensions.
Figure 22: Clamping range
Modell HIGH-Z
Dimensions of the worktop in
frame
S-400T
610 x 390mm
S-720T
930 x 510mm
S-1000T
1210 x 690mm
Modell HIGH-Z
Dimensions of the worktop on
frame
S-400T
730 x 390mm
S-720T
1050 x 510mm
S-1000T
1330 x 690mm
Fixing the worktop is done by yourself. As a recommendation, grooves in the frame of the
aluminium profile in conjunction with matching T-nuts (8mm groove width) can be
supplied.
6.3
Installation
6.3.1
Connecting the computer
HINT:
The connection of the PC / computer to the stepper motor is controlled
according to the information belonging to the stepper motor controller
manual.
