Operating instructions
T-Rex N-Serie (Stepper)
CNC-STEP GmbH & Co. KG ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 85
Support: +49 (0)2831/91021-50
07.03.2022
Transport
Fig. 25: Transport by forklift
1
Move the forklift with the forks between or under the
bars of the pallet.
2
Retract the forks so far that they protrude on the
opposite side.
3
Ensure that the pallet cannot tilt when the center of
gravity is out of center of gravity.
4
Lift the pallet with transport piece and start the
transport.
1 0 . 6
S t o r a g e
Storage of packages
Store packages under the following conditions:
•
Do not store outdoors.
•
Store in a dry and dust-free place.
•
Do not expose to aggressive media.
•
Protect from sunlight.
•
Avoid mechanical vibrations.
•
Storage temperature: 10 to 35 °C.
•
Relative humidity: max. 60 %.
•
When stored for more than 3 months, regularly check the general condition of all
parts and packaging. If necessary, refresh or renew the preservation.
HINT:
Under certain circumstances, there may be storage instructions on the
packages that go beyond the requirements mentioned here. Comply with
these accordingly.
