Model SH-2100AH-QG
Cutting Machine
（
C002
）
1
*
Please Read This Manual Carefully Before Operating The System.
Precautions
1. After the container is unpacked, please check the system for any damage and verify if the contents in
the container are physically in conformance with the packing list.
2. This user's manual is applicable to Model SH-2012AH-QG CNC System for Cuttingmanufactured by
Starfire Control Technology Co., Ltd.
3. Please verify the conformance of local mains voltage. Be sure to use an AC220V isolation
transformer between the power supply network and the system to guarantee personal safety and
operating reliability.
4. The required ambient temperature for the CNC is ranged from 0
℃
to +40
℃
and the relative humidity
is from 0 to 85%.
Special protection is required in case of operating in a high temperature, high humidity or corrosive
gas environment.
5. Make sure the CNC is correctly wired and securely grounded.
6. Never try to hot plug/unplug any cable on the rear panel of the CNC, for the damage incurred thereby
is beyond our quality warranty.
7. No cable from the output port of the rear panel should be shorted with any power cable; otherwise,
the CNC might be burned.
8. Working in a very dusty environment, the whole system should be provided with dust protection in
addition to regular dust cleaning.
9. Trained operator should be specially assigned for the CNC.
10. The internal AC/DC power supply dedicated for the CNC should never share with any other electric
appliance.
11. The graphic programming software installed in the system is a beta version asking for advices,
which is subject to improvement in service and not taken as a requisite function and item for
acceptance. Please advise us timely in case of any debug in your use.
12. Please contact the manufacturer in case of any problem. Never disassemble, assemble or modify the
system the system without prior authorization and qualification.
13. Be sure to maintain the system and the cutting machine properly--routine maintenance and check
per shift, secondary maintenance per month and primary maintenance half a year.
14. Set the parameters in strict accordance with this user's manual or the supplemental instructions
given at placing order. The CNC might poorly function or even be damaged if the parameters are set
beyond the range.
15. The LCD screen is fragile and proper care is necessary in the process of operation.
16. The technical specifications are subject to change without prior notice.
17.
Attention
：
The provided USB port is very small in power output, only good for USB disk and not
recommended for any other USB device to prevent damage.
18. The system power must be cut off when alternating the internal keyboard and an extended keyboard.
19.
Special Statement
：
The quality warranty of this product is twelve months since its manufacturing date covering the
faults specified by this user's manual.
Paid service is available for faults caught beyond the warranty period and outside the quality
warranty coverage.
The following cases are not covered by the manufacturer's quality warranty:
A
：
Damage caused by misuse due to violating the operating instructions, and
B
：
Damage due to force majeure,
The force majeure is generally inclusive of two cases:
Natural causes such as thunderstroke, flood, drought, snowstorm, earthquake, etc.
Society causes such as war, strike, government prohibition, etc.
C
：
Damage caused by unauthorized actions such as disassembly, modification, repair, etc.
20. The final power of interpretation to this user's manual is subject to
www.collectcnc.com
