Model SH-2012AH-QG
Cutting Machine
（
C002
）
3
Chapter II. Main Menu
2.1. Menu Features
The design of hierarchy-based functional windows is adopted for system operating display. If a function is invoked in the main
menu window, the corresponding subwindow menu will pop up. Press [F1] to [ F7] to select the corresponding function according to
window prompt. Press ESC to abandon the selection and return to the upper level of menu.
2.2. Description of Main Menu
VER :
The version information of software and hardware is indicated at the bottom left corner for your information.
[F1] AUTO
: Programmed control of automatic machining
[F2] MAN :
To manually control the position of cutting nozzle
[F3] Edit :
To edit/modify/input/output the machining program
[F4] SETUP :
To set system parameters
[F5] DIAGNOSE :
To check the input/output information of cutting machine
[F6] LIBMINIT :
To set normal pattern and plan material
[G] [G] [3]Initial Setting :
A dialog box as follows will appear:
Fig. 2.2 Initial setting dialog box
Fig. 2.1 Main menu display of system after booting
Display
space
of
system
information
Software
version
Main Menu
File format: to format user's program space;
Parameter: To restore the factory parameter setting;
ENGLISH: Alternating between Chinese and
English
www.collectcnc.com
