Start by pressing the “Set” button, (the clock will say the time) then press
the “Mode” button to get to the desired mode. Then press the “Up” or
“Down” button until you get to your desired time, alarm or date choice.
Please note that the date and choice of “F” or “C” for temperature must be
set manually.
For example, to set the current month, day and year, please do the
following:
Press the “Mode” key until you see the date screen, or the mode button
twice to reach the date screen.
(Please note the default date is Jan 01, 2008.)
Press the “Set” button
.
T
he clock will respond “today is Tuesday, Jan 01,
2008
.
”
Press the “Up” or “Down” button to change the year. Then press the “Set”
button again.
The first digit for the month will flash. Then press the “Up” or “Down”
button until you arrive at the correct month. The clock will say the different
months as you continue to press “Up” or “Down
."
Once you reach the
desired month, press the “Set” key. Then the numbers for the day will flash.
Then press the “Up” or “Down” button until you arrive at the desired day.
Then press the “Set” button two times and the clock will tell you the date
that it is set.
To set the temperature units to F or C (Fahrenheit or Celsius):
Say the “temperature” voice command or press the display until the
temperature is shown. Then use the “Set” button on the back of the clock to
toggle between Fahrenheit (F) and Celsius (C).
On the back side of the clock, there is a manual alarm “On/Off” switch.
Move this switch to the “Off” position if you do not want the alarm to sound.
Otherwise, you can use the voice recognition commands to manage the
alarm. Please make sure that the Alarm switch is set to the “On” position at
all times for the alarm and alarm voice commands to work.
To activate the clock, simply say “Hello Moshi” or press the display.
The clock will then say “Welcome, command please.” Please say the
commands in a normal voice, as if you were speaking to a person nearby.
