13
EN
G
LI
SH
Air filter
Disassembly
1. Remove the grille and air filter from
the back of the dehumidifier.
2. Remove the filter from the grille.
Cleaning
1. Wash the filter carefully in warm water, use a mild detergent if necessary.
Note:
Do not wash the air filter in a dishwasher.
2. Rinse the filter in clean water and let it dry before reinserting it.
Assembly
Fit the air filter back onto the grille and then fit the grille onto the dehumidifier.
Drain hose operation
When the dehumidifier is used in an environment with high humidity, the water reservoir will need
emptying often. In such circumstances, it could be more practical to use a drain hose.
1. Remove the rubber plug covering the drain hose connection (17).
2. Connect a suitable 13.5 mm bore drain hose (sold separately). Make sure that the drain hose
is secure and tight to prevent leakage.
3. The other end of the drain hose should be inserted into a drain which is lower than the drain
hose connection on the dehumidifier.
4. Position the hose in such a way that the water can drain freely. Avoid kinking and pinching
the hose.
5. To remove the drain hose, switch the dehumidifier off, unplug it and disconnect the drain
hose from the drain hose connection.
6. Re-insert the rubber plug into the drain hose connection.
