Oxygen Sampling Data Logger User’s Manual
Page
11
of
24
Detector
Principal
This meter features a zirconia oxygen sensor that utilizes solid‐state
electrochemical reactions to produce a voltage proportional to the current
oxygen. This voltage is then digitalized and filtered to a usable value. The
oxygen sensor has also been factory calibrated to meet specifications.
Operation
Guide
Make sure you read through these instructions thoroughly before using the
meter. This guide will help you become more familiar with the meter in order
to be as productive as possible in a short period of time. Please read the
Important
Safeguards
on page 4 before continuing.
IMPORTANT:
Follow
these
instructions
to
ensure
proper
set
up:
1. Download the
GasLab
®
software to your computer as shown in the
GasLab
®
Software
section on page 7.
2. Power the meter using the included universal power supply. Turn
ON
the meter.
3. Wait until the display changes colors to visually confirm it has reset
successfully after connecting it to a computer.
Connecting
Meter
The first time the meter is connected to your computer, the operating system
will install the necessary USB drivers as shown in
Error!
Reference
source
not
found.
.
This process could take a few minutes.
Figure
3:
USB
Driver
Installation.
