Oxygen Sampling Data Logger User’s Manual
Page
13
of
24
cycle. The pump mode should always be set to “Data logging” for proper
operation of the unit.
Settings
Settings – allows you to access all the parameters, options, outputs,
communications, and date/time settings to be changed or programmed.
Display
Settings
Here you can change the brightness and color theme (3 available) on the
device and you can also activate a Screen Timeout to save power. This setting
will not affect the meter’s functionality but will affect the battery life
depending on how you set this parameter.
Port
Settings
Here you can configure and activate ports that control additional accessories
such as the device Modbus address. Please call technical support for guidance
and important information before making changes to the configuration of any
of these ports. You can reach us during regular business hours at
(386)
256
‐
4910
or send us a message to
support@co2meter.com
.
Time/Date
Settings
Here you can change the date and time on the meter for more accurate
reference on the records. The default time of your meter could vary depending
on your location.
Review
these
settings
before
you
start
using
the
meter.
Data
Logs
Will take you where the logs are, you can see the data storage on your device
and display it graphically in the same window.
Data
Logging
Configuration
These meters feature an internal memory capable of storing data when not
attached to a personal computer. These units will allow you to read and store
O2 concentration levels data. Due to the nature of the design, this meter
should be connected to a computer first, before operation, in order to initialize
the sensor and set the logging interval and real‐time clock.