eVenue Thunder
15
H a r d w a r e O p e r a t i o n
Hardware Operation
The eVenue system’s setup flexibility means that the Thunder Master and Thunder Remote can be used in multiple different
configurations with ePods. They can be set up separately to send audio to a small number of ePods, or they can be used together in
large venues.
For information on connecting the eVenue system in these configurations, see Hardware Installation on page 13.
In any configuration, the basic procedures for connecting and operating the Thunder Master and Thunder Remote are the same, and
they are detailed in this section. Configuration-specific procedures are also explained.
Note:
To prevent equipment damage, keep the Thunder Master’s acrylic door closed when not changing audio
settings or connections.
Thunder Remote and Thunder Master
The Thunder Remote’s and Thunder Master’s hardware is labeled in Figure 17, and operation of these products is detailed in
procedures on the following pages.
Figure 17: Thunder Remote and I/O (Left) and Thunder Master and I/O (Right). Not all connections and controls are replicated on both units.
Thunder Master
Thunder Remote
1. Remote Volume
2. Mute Selector
3. Master Volume
4. Mic 1 and 2 Mixer Controls
5. CD, MP3, PC Mixer Controls
6. Main Mix
7. Feedback Suppressor
8. Processor
9. UPS
10. Thunder Master I/O Connection Panel
(Thunder Remote’s is on its rear.)
11. Storage Drawer