Coactive Aesthetics ROUTER-LL, User Manual

14

Operation

The following sections describe the basic features of the ROUTER-LL.

Setup Screen

The 

SETUP

 screen allows you to configure your ROUTER-LL. While in 

the 

SETUP

 screen, no connections to other ROUTER-LLs are allowed. The 

SETUP

 screen is enabled by pressing 

<S>

 and then 

<Y>

 from the 

IP 

ADDRESS CONFIGURATION

 or 

CONNECTIONS

 screen.

While in the 

SETUP

 screen, use the 

<RETURN>

 key to edit a field and the 

<TAB>

 key to move from field to field. While entering text in a field, the 

<RETURN>

 key will accept the new text and the 

<ESC>

 key will return the 

field to it’s previous value.

The following parameters can be configured:

•

Mode

: This parameter sets the ROUTER-LL to be either a 

CLIENT

 or a

SERVER

. There should be exactly one 

SERVER

 in each group of

ROUTER-LLs that will talk to each other. All other ROUTER-LLs
should be configured as 

CLIENT

s.

•

Transceiver Type

: This parameter indicates which Ethernet port

on the ROUTER-LL will be active. The choices for this field are

10BASE-T

 and 

10BASE2

.

•

IP Address

: This is the IP address of the ROUTER-LL on the IP net-

work. This addresses should be obtained from your System Adminis-
trator.

•

Subnet Mask

: This is the IP subnet mask of the ROUTER-LL on the

IP network. This mask should be obtained from your System Admin-
istrator.

•

Gateway Address

: This is the IP address of the default gateway for

the ROUTER-LL on the IP network. This address should be obtained
from your System Administrator.

•

Server Address

: This is the IP address of the ROUTER-LL

SERVER

. This field is only available if the 

Mode

 field is set to 

CLIENT

.

The save any changes made to the ROUTER-LL in the 

SETUP

 screen, 

press 

<S>

. To restore the previous configuration, press 

<ESC>

. In either 

case, the ROUTER-LL will return to the 

IP ADDRESS CONFIGURATION

or 

CONNECTIONS

 screen.