28
COAST LUXURY, CURVE LUCURY, CASCADE LUCURY
SERIES SPA CONTROLS
THE MAIN SCREEN - SPA STATUS
Important information about spa operation can be seen on the Main
Screen. Most features, including Set Temperature adjustment, can be
accessed from this screen. The actual water temperature and Set Tem-
perature can be seen, and the Set Temperature can be adjusted. Time-
of-Day, Ozone and Filter status is available, along with other messages
and alerts. The selected Temperature Range is indicated in the upper
right corner. The Jets Icon in the center will spin if any pump is running
and changes color when the heater is on. A Lock icon is visible if the
panel or settings are locked. The Menu choices on the right can be se-
lected and the screen will change to show more detailed controls or
programming functions.
NAVIGATION
Navigating the entire menu structure is done by touching the screen.
When a text item is shown in white on the main screen, it is selectable.
The menu selections on the right side of the screen can be selected.
Select one of these to enter a different screen with additional controls.
Most menu screens time out and revert to the main screen after 30 sec-
onds of no activity.
OWNER’S MANUAL
2017
The only item that can be changed on the left side of the Main Screen is
the Set Temperature. Touch either the set temperature line or the water
temperature to go to the Set Temperature screen.
MESSAGES
At the bottom of the screen, messages may appear at various times.
Some of these messages must be dismissed by the user.
THE SET TEMPERATURE SCREEN
SET TEMPERATURE
Press Inc or Dec to modify the Set Temperature. The Set Temperature
changes immediately. Press Back to return to the Main Screen. If you
need to switch between high range and low range you need to go to the
Settings Screen.
PRESS-AND-HOLD
If the Up or Down button is pressed and held, the temperature will con-
tinue to change until the button is released, or the Temperature Range
limits are reached.
THE SPA SCREEN
ALL EQUIPMENT ACCESS
The Spa Screen shows all available equipment to control, as well as
other features, like Invert. The display shows icons that are related to the
equipment installed on a particular spa model, so this screen may
change depending on the installation. The icon buttons are used to select
and control individual devices. Some devices, like pumps, may have
more than one ON state, so the icon will change to reflect the state that
