26
OWNER’S MANUAL
INFINITY COLLECTION
2021
Lock Icon:
When displayed, indicates the panel is in a locked
mode. To un-lock or lock a setting or panel lock, first press the
corresponding icon on the Lock Screen, then press and hold
the word “Lock” for 5+ seconds until the text and icon change
to the opposite state.
There are 2 lock icons that can be shown on the title bar of
most screens. A tall skinny one representing a settings lock
is applied. It is shown on screens that are affected by the
settings lock. And the standard lock icon Padlock which
represents the Panel being locked. If both settings and panel
are locked, only the panel lock will show since the settings lock
doesn’t do much in that situation. When the panel is locked,
the Settings Screen will only show items not affected by that
lock (System Info and Lock Screens).
Touch the Indicator to go to a Message Screen which shows
the message.
Some messages will include the “Call for Service” text as it
requires a ser-vice technician to fix the problem. If the panel is
locked and a message alert appears, you will be taken to the
Lock Screen (where you will need to Unlock the panel) before
you can clear the message.
Touching the Error/Warning /Re-minder/Info Icon on the
Message Screen will take you to the System Information
Screen to allow for trou-bleshooting over the phone or for a
field service tech to better under-stand what is going on.
Exiting the System information Screen will take you back to the
Message Screen in that situation.
= Adjust set temperature lower
= on
= inactive
= fatal error (Spa can’t function until it’s fixed)
= Normal Error or Warning
= Reminder Message
= Information Message
= disabled
Message waiting indicator:
The Message Waiting Indicator will show
ne of the following icons:
= Adjust set temperature higher
= Spa equipment control icon
= Jet is inactive. Indicates if a pump is
running or not
= Settings is active
= Settings is inactive
(when the panel is locked). Takes you to Settings Screen
Different animation sequences, including
blinking, may indicate different stages of
heating
or
Current water temperature if
Set temperature if or
is solid
is flashing
Brings up a screen where the spa jets, blower or
other equipment can be controlled. While on the
Spa Equip-ment Screen, you can press a Jets
button once for low speed, and if configured
press it again for high speed.
Navigating the entire menu structure is done by
touching the screen.
At the bottom of the screen, at certain times an indicator
may appear showing that a mes-sage is waiting. Touch
this indicator to go to the Message Display Screen.
On that Screen some of the messages can be
dismissed. For more on theMessage Display
Screen, see pages 25-30.
Most menu screens time out and revert to the main
screen after 30 seconds of no activity.
The three screen selections indicated below can be
selected. Touch one of these to enter a different screen
with additional controls.
NAVIGATION
