OWNER’S MANUAL
INFINITY COLLECTION
2021
42
PRV 19 STEREO SYSTEM
FRONT PANEL LAYOUT
Power
Power On/Off
Short push for the first time to turn unit on.
With unit powered on, short push for MUTE feature.
Press and hold for more than 2 seconds to turn the unit
off.
MODE
Mode Function.
SEL
Switches amongst Radio, USB, and Auxiliary.
SEL stands for SELECT.
BAND
In Radio mode, this works Band Function.
►║
In MP3 playing mode, it works Play/Pause function
VOL +
Volume Increase
VOL -
Volume Decrease
▼
Track Down/Tune Down/Reverse
▲
Track Up/Tune Up/Fast Forward
GENERAL OPERATION
- SEL button
Press and hold this button to enter into
SELECT function, then repeatedly short push in succession
results in the following menu options: Bass, Treble, Balance,
Fader, Loud, EQ, Beep, Initial Volume, Area. Press VOL + or
VOL - to adjust the options.
-
LOUD
. Choose between Loud ON or OFF
-
EQ.
Choose between Classic, Pop, Rock, Jazz and EQ off.
-
Beep.
Choose between Beep ON, Beep 2ND, Beep OFF.
-
Initial Volume.
Refers to the loudness level upon start of
the receiver.
-
Area.
Choose between USA and European.
RADIO OPERATION
A.
Press ►║
button (BAND function) to access FM and AM.
There are three FM bands and two AM bands.
B.
Tuning.
A short press of the ▼ or ▲ button results in a
search of the station and stops at next sufficient signal
strength. A long press results in manual tuning mode.
USB OPERATION
A. Insert a USB stick into the USB slot. * Songs must be of the
mp3 or wma format. *
B.
►║
button. Press it to pause the track. Press it again to
resume play.
C. ▼ and ▲ button (Track Up / Track Down)
Short press Track Up or Track Down button to select the next
or previous track. Press and hold Track Up or Track Down
button to go fast forward and rewind the current
BLUETOOTH OPERATION
The Media device must Bluetooth capability in order to stream
music.
A. To pair your Bluetooth device, press the MODE button on
the stereo until BT AUDIO appears.
B. Press and hold the BAND button until PAIRING appears.
C. Next, go to settings on the Bluetooth device and turn the
Bluetooth option to “on”.
D. Select the “PRV19” from available devices. If you are
prompted for a passcode enter “1234”. If the stereo does not
immediately pair press the BAND button. This will allow the
pairing process to finalize. A noise will alert you that the
devices are paired. The display will also read “CONN
OK” (Connection Okay).
Note:
To disconnect your device press and hold the BAND
button. The display will read “DISCONN” to alert you the
disconnection is complete.
Note:
While playing BT Music press the
►║
to pause or
resume playback.
