27
THE MAIN SCREEN
SPA STATUS
Important information about spa operation can be seen quickly from the
Main Screen. The most important features, including Set Temperature
adjustment, can be accessed from this screen. The actual water tem-
perature can be seen in large text and the desired, or Set Temperature,
can be selected and adjusted. Time-of-day, Ozone operation and Filter
Operation status is available, along with other messages and alerts.
High Temperature Range vs. Low Temperature Range is indicated in the
upper right corner. The Jets Icon in the center will spin if any pump is
running and changes color when the heater is on. A “lock” icon is visible
if the panel or settings are locked.
The Menu choices on the right can be selected and the screen will
change to show more detailed controls or programming functions.
Note: After 3-5 minutes the display will automatically go into sleep mode,
which turns the display off. This is normal operation. Press any button on
the screen to wake the panel up.
OWNER’S MANUAL
2017
NAVIGATION
Navigating the entire menu structure is done with the 5 buttons on the
control panel. When a text item changes to white during navigation, that
indicates the item is selected for action. Operating or changing a selected
item is generally done with the center or “Select” button.
The only item that can be changed on the left side of the Main Screen is
the Set Temperature. Press the Left Arrow button to change the Set
Temperature number to white. The Set Temperature can then be ad-
justed with the up and down buttons. Pressing the Select button or the
Right Arrow button will save the new set temperature.
On the right side of the screen, the menu selections can be selected with
the Up and Down Buttons. Use the Select Button to choose an item.
Selecting one of these items will change to a different screen with addi-
tional controls.
MESSAGES
At the bottom of the screen, messages may appear at various times.
Some of these messages must be dismissed by the user.
Press-and-Hold
If an Up or Down button is pressed and held when the
Set Temperature is selected, the temperature will continue to change
until the button is released, or the Temperature Range limits are reached.
