17
SEA WOLF
MAIN BOARD POWER ON PROCEDURES
Occasionally during shipment or other movement of the game,
power to the motherboard may be interrupted, causing the “Bios”
to become corrupted. Re-starting the motherboard is a simple
task, as outlined below.
This procedure is required only when power to the
motherboard has been interrupted, or the power supply is
inoperative. Before you perform this procedure check to be
sure that there is voltage to the power supply.
Symptom: Monitor displays “NO CABLE” and CPU fan and
Power supply fan not operating.
ENLARGEMENT OF AREA
The picture above shows the pin configuration, located in the left corner on
the main board.
Short the 2 green pins labeled “PWR SW” for 2
seconds and the board will re-boot and operate correctly
.
MOTHERBOARD
http://www.coastalamusements.com/
and our Technical support line is open Monday through
Friday 7:00 AM to 4:30 PM Eastern Standard Time (732)-905-6662
Summary of Contents for Sea Wolf
Page 16: ...16 ...