USER INSTRUCTIONS
BLU-E BIOMETRIC PULL HANDLE
LIT-FG-BLU-e
HOW DO I CLEAN MY BLU-E FINGERPRINT SCANNER?
HOW DO I CLEAN MY SATIN STAINLESS STEEL BLU PULL HANDLE?
HOW DO I CLEAN MY PVD STAINLESS SATIN BLACK PULL HANDLE?
•
The fingerprint scanner is basically maintenance free
•
Clean the sensor surface of the fingerprint scanner and the fingerprint
scanner itself with a damp (not wet) nonabrasive cloth
•
Q-tips, microfibre cloths and glass cleaning cloths are suitable for this
purpose
•
Materials containing cotton, paper towels, paper tissues, kitchen
sponges, damp dish cloths and kitchen roll are NOT suitable
•
Use clean water without adding detergent
•
Treat the sensor surface with care
•
If it is necessary to disinfect the entire fingerprint scanner including the
sensor, you can use watery and alcohol-based agents – however, these
should be able to dry quickly in the sensor area
•
The varnish of the fingerprint scanner is very resistant to all common
cleaning agents and disinfectants with less than 10 minutes of exposure
•
Stainless Steel Renovation Kit. - DR121 removes 'tea stains', surface rust,
contamination and on-site dust and dirt without attacking the metal
•
It is a combination of organic acids and surface-active agents with a
pH value of 3
•
It doesn't present a danger to the person using it or the environment
•
It is free from abrasive particles
•
Used regularly, it keeps stainless steel hardware sparkling clean and
looking like new
•
Particularly good for hardware on property situated on or near the
coast
•
Conditioner should be applied as directed to the hardware after the
cleaner
•
Follow directions on DR121 leaflet
•
Clean regularly with a soft, dry cloth or duster
•
Rubbing or wiping should be carried out in the direction of the polish/
linishing lines, not across them
•
Product should be washed monthly using a soft cloth and mild soapy
water then dried immediately with a clean, soft cloth - especially if fitted
on or near the coast
•
Fingerprints can be removed by washing product as above
PLEASE NOTE: The cleaner should not be used on PVD Stainless Satin Black
15
www.coastal-group.com