USER INSTRUCTIONS
BLU-E BIOMETRIC PULL HANDLE
LIT-FG-BLU-e
Four red illuminated LED segments:
If all four LED segments light up after a finger has been placed, the user is not authorised to open the door or the
finger was not correctly recognised. Note that the finger must be placed correctly in order for it to be recognised.
A red flashing LED segment:
If the top left LED segment flashes red, the bus communication between the 'ekey dLine fingerprint scanner'
and the 'ekey dLine control unit' has been disrupted. If the system does not run to normal, proceed as follows:
1. Disconnect the power supply. 2. Wait at least 10 seconds 3. Restore the power supply. The system should now
return to normal. If, contrary to expectations, no connection is established between the 'ekey dLine fingerprint
scanner' and the 'ekey dLine control unit', contact ekey support (support@ekey.net).
A red flashing LED segment:
If the top-right LED segment flashes red, your WLAN network is not available. Check that selected WLAN network
is available.
ERROR MESSAGES
18
BLU-e Fitting Guide