Coastal KM078 Fitting Instructions Manual Download

Page: 2 / 6

FITTING INSTRUCTIONS

KM078 & KM130 LEVER DOOR HANDLE ON BACKPLATE

LIT-FI-KM078/KM130

Page 2 of 6

01726 871 025

sales@coastal-group.com

coastal-group.com

117

Drill out for spindle,
euro cylinder
and handle fixing
points.

Dimensions
shown
in mm.

Insert spindle
through spindle
hole.

Ensure spindle is
equally positioned
with same length
showing on
the internal and
external faces.

The dish cut side
of the spindle must
be facing the lock
edge of door.

Tighten grub screw
on outer lever.

Affix external
lever/backplate
into position onto
spindle maintaining
spindle position.

Summary of Contents for KM078

Page 1: ...FITTING INSTRUCTIONS KM078 KM130 LEVER DOOR HANDLE ON BACKPLATE LIT FI KM078 KM130 Page 1 of 6 T 01726 871 025 E sales coastal group com W coastal group com ...

Page 3: ...coastal group com W coastal group com Affix internal lever backplate onto spindle Insert Bolt Receiver x3 into external backplate fixing holes Insert fixing screws x3 through internal backplate fixing holes and into Bolt Receivers and loosely tighten backplates against door DO NOT tighten the screws at this stage 5 6 7 ...

Page 4: ...m W coastal group com Loosely tighten the cylinder screw into the lock faceplate DO NOT tighten the screw at this stage Tighten fixing screws on internal backplate until both internal and external backplates are tight against the door Push cover plate of internal external handle onto backplates Insert euro cylinder into lock 8 9 10 11 ...