V001
CLM253
User Manual
4 of 61
Master Unit
CLM253
1.
Introduction
The IP through coaxial cable system provided by
coaxLAN
,
coaxLAN
, has been especially
designed to convert the coaxial network into a data network in a very easy manner. The
coaxLAN
equipment enables the transmission and reception of an internet signal via the
existing coaxial cable of a television installation, without having to undertake any actions
on the infrastructure.
Simply by adding a headend master equipment
CLM253
and a slave (
CL600,
Cl600WLAN,CL64WLAN
) at each point where the internet signal has to be carried, the
television installation is upgraded to transmit IP data at high speed. The
Modem
also
acts
as a Wi-Fi router allowing the creation of a wireless network easily wherever the
coaxLAN
Modems
is installed.
A single
CLM253
master equipment supports up to 253 slaves with encrypted
communications. It is also possible to increase the number of
a Modem
the same network
by simply installing new master equipment in tandem (up to 4
CLM253
for the same
coaxial cable).
This user manual includes instructions to manage an
CLM253
master unit.
1.1.
Requirements
The
CLM253
master unit can be manage through its web management interface. The
following runtime environment is recommended in order to use this web management
interface properly:
Operating system: Windows 2000, Windows XP, Windows NT, Windows Vista,
Windows 7 or Windows 10
Hardware requirement: CPU PIII 800 MHz, 256M RAM memory, 1 GB disk space and
10/100M Ethernet interface.
1.2.
Functional Features
The web management interface supports the functions shown in the following table:
